VCT 7-Step Diamond Polishing Pads Set – 50 to 3000 Grit
The VCT 7-Step Diamond Polishing Pads Set provides the complete progressive wet polishing sequence for granite, marble, and natural stone — from 50 grit through to 3000 grit. Seven colour-coded, Velcro-backed resin bond pads branded Vus Cutting Technology for consistent identification and performance across every stage. Use before PG15 Granite Powder Oxide for the final mirror finish. Compatible with M14 angle grinders using a Velcro Pad Holder.
Product Details
The complete seven-stage diamond polishing system for achieving a deep, mirror-quality finish on granite, marble, and natural stone — branded Vus Cutting Technology and colour-coded for fast grit identification on the job.
The VCT 7-Step Diamond Polishing Pads Set is a full progressive wet polishing system covering every stage from coarse material removal through to a fine pre-mirror finish. Each pad in the set is colour-coded and grit-stamped for instant identification, eliminating confusion between stages during production work. Velcro-backed for use on standard M14 angle grinders with a Velcro Pad Holder or Rubber Backing Pad.
The 7-Step Grit Sequence
| Step | Grit | Pad Colour | Purpose |
|---|---|---|---|
| 1 | 50 | Blue | Aggressive removal of saw marks, tool lines, and deep surface scratches |
| 2 | 100 | Yellow-Green | Removes 50 grit scratch pattern, begins surface refinement |
| 3 | 200 | Orange | Mid-stage refinement, smoothing the surface after coarse grinding |
| 4 | 400 | Red | Further refinement, removing 200 grit scratch marks |
| 5 | 800 | Green | Fine surface preparation, surface begins to show sheen |
| 6 | 1500 | Teal/Blue | Near-polish stage, removes 800 grit scratches, high sheen |
| 7 | 3000 | Tan/Brown | Final pad stage, surface ready for PG15 Granite Powder Oxide |
What Are the VCT 7-Step Polishing Pads Used For?
This set provides the complete polishing sequence for granite and marble surface preparation from freshly cut or ground stone through to a near-mirror finish. Key applications include:
- Full polishing sequence on freshly cut or sawn granite slabs and tombstones
- Worktop edge polishing from coarse to fine before final buffing
- Restoration of dull or scratched granite and marble surfaces
- Progressive polishing on marble memorial stones and monuments
- Surface preparation of granite before PG15 Granite Powder Oxide application
- Profiled edge finishing on granite kitchen worktops and vanity tops
Product Features
- 7 colour-coded pads — each grit has a distinct pad colour matching the number stamped on the face, allowing instant identification at every stage without stopping to check
- Vus Cutting Technology branded — quality-tested pads produced under the VCT brand for consistent performance across the full grit range
- Full grit range 50–3000 — covers the complete polishing sequence from aggressive coarse grinding through to a fine finish ready for powder oxide
- Resin bond construction — delivers smooth, consistent cutting action on granite and marble without aggressive over-cutting
- Velcro backing — quick-change mounting on any M14 angle grinder with a Velcro Pad Holder or Rubber Backing Pad
- Wet use — water cooling during polishing protects the stone surface and extends pad life
- Flexible pad body — suitable for flat slabs, worktop edges, tombstone faces, and profiled surfaces
Technical Specifications
| Specification | Detail |
|---|---|
| Tool Type | Resin Bond Diamond Polishing Pads |
| System | 7-Step Progressive Wet Polishing |
| Grit Sequence | 50, 100, 200, 400, 800, 1500, 3000 |
| Diameter | 100mm (4″) |
| Backing | Velcro |
| Use | Wet |
| Compatible Equipment | M14 angle grinders with Velcro Pad Holder |
| Sold As | Set of 7 pads |
| Application | Granite, marble, natural stone |
VCT 7-Step vs 3-Step Polishing Pads — Which Should I Use?
| VCT 7-Step Set | VCT 3-Step Flexi Pads | |
|---|---|---|
| Best for | Freshly cut or heavily scratched stone | Pre-ground or lightly scratched stone |
| Stages | 7 full grit stages | 3 compressed stages |
| Time | Longer, maximum control | Faster turnaround |
| Finish | Maximum depth and gloss | High-quality production finish |
| Recommended for | Large slab work, restoration, dark granites | Daily production, tombstone work, edges |
Where Do These Pads Fit in the Polishing Process?
- Grinding & shaping — 100mm Diamond Turbo Cup Wheel to remove saw marks and level the surface
- Progressive polishing — VCT 7-Step Pads, working through 50, 100, 200, 400, 800, 1500, and 3000 grit in sequence
- Final mirror finish — PG15 Granite Powder Oxide applied wet for deep reflectivity and colour depth
Frequently Asked Questions
Do I need to use all 7 steps every time? On freshly cut or sawn stone, start from 50 grit and work through all seven stages. On stone that has already been ground smooth, you can begin at a higher grit — but never skip more than one stage as this will leave visible scratch marks in the final finish.
Can I use these pads dry? These pads are designed for wet use. Run water over the surface during polishing to protect the stone from heat stress and to extend the working life of each pad.
What angle grinder do I need? Any M14 angle grinder fitted with a Velcro Pad Holder or Rubber Backing Pad. Both are available in the Granite & Marble Polishing Products range.
Can these be used on marble? Yes. Use lighter pressure on marble, particularly on the 50 and 100 grit pads, to avoid over-cutting the softer surface. Marble can often begin the sequence at 100 or 200 grit if the surface has already been prepared.
What comes after the 3000 grit pad? Apply PG15 Granite Powder Oxide with a suitable pad to bring the surface to the final deep mirror finish. The PG15 stage should only be done once all scratch marks from the 3000 grit pad have been completely removed.
